How to repair the splintered glass of a car by yourself

Small to moderate cracks in the glass car can be easily repaired with a repair kit based on composite resin glass. In order to prevent the crack expand and permanently ruin the windshield of the automobile, repair is important as it will appear on the surface. Consult a specialist car repair if the crack is enlarged, as the auto glass may need to be completely replaced.

Instructions

  1. Clean the window seams and waste. Spray a moderate amount of glass cleaner on it. Clean stains and dirt on the glass with paper towels or newspaper. Let the glass completely air dry in the sun before proceeding to repair the crack.
  2. Use a repair kit based on resin that comes in syringe. Unwarp everything in the package and focus the adhesive disc, holding the pedestal into place of the crack. “Drill the hole in the adhesive disk, remove the coating from one side of the disc and press it on the glass,” says Everything Auto. Make sure the pedestal on the disc is facing upward so that the syringe can be inserted in its place.
  3. Insert the syringe (provided with the kit) on the pedestal which is connected to disk. Make sure the suction opening of the syringe is down on the pedestal and the piston upward. Turn the syringe clockwise until it clicks into place inside the pedestal.
  4. Add the plunger up to suck air bubbles from the crack. Hold momentarily and release the syringe to the suction causes the repair compound is inserted into the crack. Repeat this process at least 10 times.
  5. Let the repair compound to cure in a well-ventilated area or in the sun for about 30 minutes. Clean any excess composite glass with a damp towel.